Archives
- 2010.08.15: Puppet Master Final Project Page Updated
- 2010.08.14: Shopbot Project - Modular Shelving
- 2010.08.14: Diploma Completion Checklist Update - 08.14.2010
- 2010.08.14: Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter
- 2010.08.12: Very Basic Beginner Assembly Tutorial III: How to Use Avrdude
- 2010.08.12: Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie
- 2010.08.11: Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS
- 2010.08.06: On Self-Replication
- 2010.08.05: Complete and Working --> Modified Hello Echo + Button + FTDI v.2
- 2010.07.30: Internet 0
- 2010.07.27: Modified Hello Echo + Button + FTDI v.2 ---> In Progress
- 2010.07.27: Modified Hello Echo + Button + FTDI v.1
- 2010.07.27: Mantis Hardware / Software Trial Run
- 2010.07.27: First 3D Scans - Modela Scan of Laughing Die and Shell
- 2010.07.27: Interlocking Rings - 3D Printing
- 2010.07.27: MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle
- 2010.07.27: Capacitive Sensing - PuppetMaster v.1-v.2
- 2010.07.27: Diploma Completion Checklist (so far) --> 2010-07-27
- 2010.07.27: [Revised] Fab Academy Final Project Proposal: PuppetMaster
- 2010.07.27: Personal & Lab Pages
- 2010.07.27: Hello Serial Echo
- 2010.07.27: Hello FTDI Step Response
- 2010.07.27: FabISB Round 2: Stuffing and Programming the Board
- 2010.07.27: Making Programming, Connector and Serial Cables
- 2010.07.27: Final Project Licencing and Distribution
- 2010.07.27: Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards
- 2010.07.27: Spindle Assembly - Mantis Milling Machine
- 2010.07.22: Processing
- 2010.07.14: FTDI header for .cad
- 2010.06.02: PuppetMaster Final Project Page
- 2010.06.01: The world is broken
- 2010.05.19: Encoded Building Materials with Computer Numerical Control Assembly
- 2010.05.19: Continuing the final project
- 2010.05.19: Final Project Plan: PuppetMaster Universal Remote
- 2010.05.19: Towards the final project
- 2010.05.18: Final project notes
- 2010.05.18: Final project: pinball machine themed on an unfinished opera by Dylan Thomas and Stravinsky
- 2010.05.12: Final project progress
- 2010.05.12: Levitating Elephant
- 2010.05.12: Big pile of crap
- 2010.05.12: Electronics design and production
- 2010.05.11: XBee Networking
- 2010.05.05: Faboost 0.0
- 2010.05.05: Final Project Progress
- 2010.04.28: Servo motor mosh
- 2010.04.27: The Mantis
- 2010.04.26: Machine button interface
- 2010.04.18: The Fabian: an Arduino-compatible, student-friendly board for Fab Labs
- 2010.04.16: Super simple bootstrap 3-axis controller
- 2010.04.11: XBee Networking
- 2010.04.06: Breadboard-friendly Attiny45 board
- 2010.03.31: Best Error Message Ever
- 2010.03.31: Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial
- 2010.03.31: Pure Data Frequency Modulator
- 2010.03.30: DIY hobo game controllers
- 2010.03.29: My favorite python/GTK reference
- 2010.03.22: A soldering video tutorial
- 2010.03.20: Fab ISB - Round 1: Milling Out The Board
- 2010.03.17: Motion Sensing Glow Skull
- 2010.03.17: The Gellerizer
- 2010.03.09: Completed TARDIS Cast | Working Light
- 2010.03.04: Licensing
- 2010.03.03: Half drill bit!
- 2010.03.02: F(l)uxamascanner
- 2010.02.17: Picza
- 2010.02.17: New bazaar tutorial
- 2010.02.11: TARDIS: Moldmaking
- 2010.02.11: Laser Cut Cards - Construction Kit
- 2010.02.10: Second article for MAKE Blog
- 2010.02.08: 3-D modeling for molding and casting
- 2010.02.04: MAKE blog post #1: Make a Press-fit Construction Kit
- 2010.01.26: Endmill cigar box
- 2010.01.24: NIK
- 2010.01.22: Molding and casting a flexible coupling part 2
- 2010.01.19: Working outside the lab, but making progress
- 2010.01.15: Molding and casting a flexible coupling
- 2010.01.15: Tintin Rocket (neko-wa kowaii)
- 2010.01.14: Monkeys on typewriters
- 2010.01.14: Fluxamacutter press-fit DIY vinyl cutter
- 2010.01.14: Molding and casting
- 2010.01.13: Moon Crater
- 2010.01.12: TARDIS: 3D Modeling
- 2010.01.11: Intro to Bazaar
- 2010.01.08: We've become a casino
- 2009.12.08: Re-Programming the Echo Board
- 2009.12.08: Persistence of Vision
- 2009.11.25: Make something (anything) big
- 2009.11.25: Svg skateboard design
- 2009.11.25: Shelves from the Shopbot
- 2009.11.25: Make it Big(ish)
- 2009.11.25: Hello circuits
- 2009.11.24: Press-fit construction
- 2009.11.24: Year-long Project
- 2009.11.13: Standard software on the AS220 fab machines + hairy.cad
- 2009.11.10: Lasercutting!
- 2009.10.28: Hey FabFolk! It's # 4 :)
- 2009.10.21: A cult classic
- 2009.10.21: Fetchdeps.sh and gik.svg
- 2009.10.19: Kamina glasses
- 2009.10.15: A window frame
- 2009.10.15: Sunglasses
- 2009.10.14: A box
- 2009.10.14: Modeling Assignment
- 2009.10.13: Coil wrapping machine
- 2009.10.13: Hello!
- 2009.09.29: A SORT OF FRANKENSTEIN
- 2009.09.28: My Semester in a Crystal Ball... Thoughts on a proposed semester project
- 2009.09.22: Assignment #1: Create a self-replicating machine
- 2009.09.22: Hello World (of self-reproducing machines)! Fab Academy Assignment 1
- 2009.09.22: Assignment #1: Create a self-replicating machine
- 2009.09.21: Fab Academy launches
Projects
- Laser Cut Cards - Construction Kit by Anna Kaziunas France
- MAKE blog post #1: Make a Press-fit Construction Kit by Shawn Wallace
- NIK by Noah Bedford
- Press-fit construction by Elliot Clapp
- Lasercutting! by Jenine Bressner
- Hey FabFolk! It's # 4 :) by Makeda Stephenson
- Sunglasses by Noah Bedford
- FabISB Round 2: Stuffing and Programming the Board by Anna Kaziunas France
- Electronics design and production by Noah Bedford
- Breadboard-friendly Attiny45 board by Shawn Wallace
- A soldering video tutorial by Jenine Bressner
- Fab ISB - Round 1: Milling Out The Board by Anna Kaziunas France
- Second article for MAKE Blog by Shawn Wallace
- Hello circuits by Elliot Clapp
- Shopbot Project - Modular Shelving by Anna Kaziunas France
- Big pile of crap by Noah Bedford
- Make something (anything) big by Makeda Stephenson
- Shelves from the Shopbot by Jenine Bressner
- Make it Big(ish) by Elliot Clapp
- Complete and Working --> Modified Hello Echo + Button + FTDI v.2 by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.2 ---> In Progress by Anna Kaziunas France
- Modified Hello Echo + Button + FTDI v.1 by Anna Kaziunas France
- Hello Serial Echo by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Making Programming, Connector and Serial Cables by Anna Kaziunas France
- Re-Programming the Echo Board by Elliot Clapp
- Persistence of Vision by Jenine Bressner
- Completed TARDIS Cast | Working Light by Anna Kaziunas France
- TARDIS: Moldmaking by Anna Kaziunas France
- 3-D modeling for molding and casting by Jenine Bressner
- Molding and casting a flexible coupling part 2 by Noah Bedford
- Molding and casting a flexible coupling by Noah Bedford
- Monkeys on typewriters by Shawn Wallace
- Molding and casting by Makeda Stephenson
- Moon Crater by Elliot Clapp
- TARDIS: 3D Modeling by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial III: How to Use Avrdude by Anna Kaziunas France
- Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie by Anna Kaziunas France
- Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- New bazaar tutorial by Noah Bedford
- Intro to Bazaar by Noah Bedford
- First 3D Scans - Modela Scan of Laughing Die and Shell by Anna Kaziunas France
- Interlocking Rings - 3D Printing by Anna Kaziunas France
- MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle by Anna Kaziunas France
- Half drill bit! by Noah Bedford
- F(l)uxamascanner by Elliot Clapp
- Picza by Noah Bedford
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- Hello FTDI Step Response by Anna Kaziunas France
- Levitating Elephant by Noah Bedford
- Servo motor mosh by Jenine Bressner
- Motion Sensing Glow Skull by Anna Kaziunas France
- The Gellerizer by Elliot Clapp
- Processing by Jenine Bressner
- Levitating Elephant by Noah Bedford
- Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial by Anna Kaziunas France
- Pure Data Frequency Modulator by Elliot Clapp
- DIY hobo game controllers by Shawn Wallace
- My favorite python/GTK reference by Noah Bedford
- Internet 0 by Jenine Bressner
- Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards by Anna Kaziunas France
- XBee Networking by Elliot Clapp
- XBee Networking by Elliot Clapp
- Mantis Hardware / Software Trial Run by Anna Kaziunas France
- Spindle Assembly - Mantis Milling Machine by Anna Kaziunas France
- The Mantis by Shawn Wallace
- Machine button interface by Shawn Wallace
- Super simple bootstrap 3-axis controller by Shawn Wallace
- Diploma Completion Checklist Update - 08.14.2010 by Anna Kaziunas France
- Diploma Completion Checklist (so far) --> 2010-07-27 by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Licensing by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- The world is broken by Noah Bedford
- Final project notes by Noah Bedford
- Final project progress by Noah Bedford
- Puppet Master Final Project Page Updated by Anna Kaziunas France
- Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter by Anna Kaziunas France
- Capacitive Sensing - PuppetMaster v.1-v.2 by Anna Kaziunas France
- [Revised] Fab Academy Final Project Proposal: PuppetMaster by Anna Kaziunas France
- Final Project Licencing and Distribution by Anna Kaziunas France
- PuppetMaster Final Project Page by Anna Kaziunas France
- Encoded Building Materials with Computer Numerical Control Assembly by Makeda Stephenson
- Final Project Plan: PuppetMaster Universal Remote by Anna Kaziunas France
- Towards the final project by Jenine Bressner
- Final project notes by Noah Bedford
- Final Project Progress by Elliot Clapp
- Servo motor mosh by Jenine Bressner
- Working outside the lab, but making progress by Jenine Bressner
- Year-long Project by Elliot Clapp
- Coil wrapping machine by Shawn Wallace
- On Self-Replication by Anna Kaziunas France
- FTDI header for .cad by Noah Bedford
- Tintin Rocket (neko-wa kowaii) by Noah Bedford
- Fluxamacutter press-fit DIY vinyl cutter by Shawn Wallace
- Lasercutting! by Jenine Bressner
- Kamina glasses by Noah Bedford
Links
Recent entries
Puppet Master Final Project Page Updated
Shopbot Project - Modular Shelving
Diploma Completion Checklist Update - 08.14.2010
Unsuccessful Modela Troubleshooting - Partially Successful Switch to Roland Vinyl Cutter
Very Basic Beginner Assembly Tutorial III: How to Use Avrdude
Very Basic Beginner Assembly Tutorial II: How to Use Gavrasm to compile an .asm flie
Very Basic Assembly Tutorial I: Where to Get Gavrasm for the Mac OS
Complete and Working --> Modified Hello Echo + Button + FTDI v.2
Modified Hello Echo + Button + FTDI v.2 ---> In Progress
Modified Hello Echo + Button + FTDI v.1
Mantis Hardware / Software Trial Run
First 3D Scans - Modela Scan of Laughing Die and Shell
Interlocking Rings - 3D Printing
MakerBot Cupcake CNC- Assembling the Plastruder mk4 Spindle
Capacitive Sensing - PuppetMaster v.1-v.2
Diploma Completion Checklist (so far) --> 2010-07-27
[Revised] Fab Academy Final Project Proposal: PuppetMaster
FabISB Round 2: Stuffing and Programming the Board
Making Programming, Connector and Serial Cables
Final Project Licencing and Distribution
Internet 0 / Zero - Milling, Stuffing & Setting Up the Boards
Spindle Assembly - Mantis Milling Machine
PuppetMaster Final Project Page
Encoded Building Materials with Computer Numerical Control Assembly
Final Project Plan: PuppetMaster Universal Remote
Final project: pinball machine themed on an unfinished opera by Dylan Thomas and Stravinsky
Electronics design and production
The Fabian: an Arduino-compatible, student-friendly board for Fab Labs
Super simple bootstrap 3-axis controller
Breadboard-friendly Attiny45 board
Using a GUI to Control Processing Output with ControlIP5, Firmata via Serial
My favorite python/GTK reference
Fab ISB - Round 1: Milling Out The Board
Archives
